1.5 L Dual-Supply Electrolyzer - HHO Generator


This is What You Get:

  • (1) 1.5 Liter Bernardin Wide-Mouth Mason Glass Jar.
  • (1) Wide-Mouth Plastic Cap. (Holes drilled and parts secured to cap)
  • (1) "Cradle-Holder" 3 - 3/4" wide - 24 gauge steel straps, w/ 1/4" X 7/8" bolts, flat washers, lock-washer, & hex-nuts to secure & anchor Electrolyzer.
  • (2) 18-8SS Stainless-Steel Bolts "Electrodes" 1/4" X 6" - Anode & Cathode.
  • (2) 4 ft. Vacuum Hose Tubing - (7/16” OD X 3/16” ID X 4' L).
  • (2) 4 ft. 14 Gauge Wire, 1-Red (Pos+) & 1-Black (Neg-) for Device to Battery Termination.
  • (1) Butt Terminal 16-14 AWG
  • (1) Spade Terminal 16-14 AWG.
  • (2) Ring Terminals 16-14 AWG.
  • (1) 4 ft. 3/8" Split-Flex Tubing, for neatly routing your electrical wires.
  • (1) In-Line Nylon Fuse Holder, 20 Amp fuse included.
  • (1) 6" Clear Vinyl Tubing (1/4 ”OD X 1/8” ID X 6" L) for Adjustable Valve - "Bubbler."
  • (3) Tie-Wraps 5" and 11 3/4".
  • (1) 1/8" - 3/8" Universal Vacuum Tee for Connecting Main Vacuum Lines.
  • (1) Nylon 1/4" Barbed Tee for Connecting Vacuum Lines.
  • (2) Nylon 1/4" Barbed 90 deg. Elbows for Dual HHO Outputs.
  • (2) Nylon 1/4" Barbed straight-thru connector.
  • (2) 1/4" Polypropylene Liquid/Gas Check Valves. Works with vacuum between 2 and 29 in. Hg. and pressures from 1 psi up to 150 psi.
  • (1) 3/16" Polypropylene Pressure Relief Check Valve -(cracking pressure 1 psi - Max. 125 psi)
  • (1) Brass Vacuum Connector - 1/8" Barbed X 3/16" pipe-fitting for connection to Air Intake or Air Filter Housing.
  • (1) Vacuum Adjustable Valve "Bubbler", for regulating the amount of bubbles in the Electrolyte.
  • (1) Quick-Splice Electrical Connector, 16-14 AWG. The easy way to splice 2 wires together.
  • (6) 1/4" Hex Nuts. (8) 1/4" Flat Washers. (2) 1/4" Lock Washers. (2) 1/4" Wing Nuts.
  • (1) Ribbed Anchor 4-6 X 7/8" Inserted in end of bubbler air tubing.
  • (1) 1.5 Litre Distilled Water. (1) 25g Baking Soda. (Included in PICK-UP orders ONLY)
  • Dual Dial Map Sensors Sold Seperatly $54.95 plus $12.95 S&H

(We Ship Our Units with a Safety Sheet and Basic Installation Instructions)

EFEI Sensor required you can order it here off this site as it is a special order. EFEI --- http://go2-url.com/anzrer

More information on Map and EFEI sensors can be found here.